Entel HT446E User Manual

Entel HT446E User Manual

Ht446 series professional submersible pmr446 handheld transceivers
Hide thumbs Also See for HT446E:

Advertisement

User Guide – HT446 Series
Professional submersible PMR446 handheld transceivers
v10/10
Common Information
(all models)
HT446E
Entry
HT446L
LCD

Advertisement

Table of Contents
loading

Summary of Contents for Entel HT446E

  • Page 1 User Guide – HT446 Series v10/10 Professional submersible PMR446 handheld transceivers Common Information (all models) HT446E Entry HT446L...
  • Page 2: Table Of Contents

    Introduction This guide covers the ‘basics’ of your radio’s operation. To meet your exact requirements the radio may have been customised by your Entel authorised dealer. These features will be explained in a separate guide issued by the dealer. Table of Contents...
  • Page 3: Certification

    Certification Declaration of Conformity We Entel UK Limited of: 320 Centennial Avenue Centennial Park Elstree Borehamwood Hertfordshire WD6 3TJ United Kingdom Declares under our sole responsibility that the product range: HT446 PMR446 UHF Handheld Radio Transceiver Conforms to the following standards or other nominative docum ents: •...
  • Page 4: Radio Care

    Radio care Warranty End of Life Disposal The HT446E/L comes with a 12 month warranty, • When your Entel transceiver reaches the end of its for details see our full terms & conditions. useful life, please ensure that the unit is disposed of in an environmentally friendly way.
  • Page 5: Battery Care

    Minimise the number of times you charge your battery especially in hotter environments which further shortens a battery’s life. Note: only genuine Entel batteries should be used. Battery Communications Only genuine batteries offer the battery charge count feature informing you when the battery is Each battery used with your radio has a reaching the end of its useful life.
  • Page 6: Packing List

    Carry Options CFC750 HT 2.0 series soft leatherette case finished in black with carry strap CLC752 HT446E heavy duty black leather case with strap & belt loop CLC753 HT446L heavy duty black leather case with strap & belt loop CBH750...
  • Page 7: Preparing Your Radio For Use

    Bluetooth double earpiece headband defender headset with boom mic and ear cup PTT * VOX = Voice Operated Transmit (hands free operation) For complete up to date list of optional accessories visit www.entel.co.uk Preparing Your Radio For Use Attaching / Removing The Battery Pack...
  • Page 8: Preparing Your Radio For Use

    Preparing Your Radio For Use cont... Attaching / Removing Audio Accessories To attach, remove the accessory cover by unscrewing the locking screw anti-clockwise (leave cover attached or store in a safe place). Attach accessory plug by locating over the socket. Carefully tighten the locking screw clockwise until finger tight (do not tighten with a screwdriver etc).
  • Page 9: Using Your Radio

    Turn your radio on using the on / off power button on the front of the radio. The radio will “beep” and the LED will briefly illuminate yellow. (The beep may be disabled, if required, by your Entel approved dealer). Making a Call Before transmitting on your radio, first ensure that the channel is not in use (yellow or green busy LED will be illuminated and audio may be heard from speaker).
  • Page 10: Using Your Radio

    HT446E - To start / stop scanning, press the dealer assigned function button. HT446L - Turn the channel control to the scan channel assigned by your dealer.
  • Page 11: Ht446E

    HT446E Standard Features: • Up to 16 programmable channel positions • Transmit power output 0.5 Watts • CTCSS & DCS (Analogue & Digital squelch) with squelch tail elimination (removes the ‘shh’ noise) • Exceptionally loud and clear audio • Robust design, exceeds MIL-STD-810C/D/E/F •...
  • Page 12: Controls & Indicators

    Controls & Indicators Dealer Channel change control programmable button 3 Antenna Dealer programmable LED indicator button 1 Push To Talk (PTT) button Volume control Dealer programmable button 2 Speaker On / Off Microphone On / Off button. Press to turn radio on, press and hold to turn off. Press up / down buttons to increase / reduce volume.
  • Page 13: Programming Your Radio 12

    Programming your HT446E radio The radio’s frequency and tone configuration can be changed in user programming mode. This will allow you to put any of the standard frequencies or tones in to any channel position. When a radio has been configured this information can be quickly and easily cloned into other units using an optional cloning cable.
  • Page 14 Check / Modify CTCSS/DCS Tone Checking the current configuration this action). To check the entered setting, press the A momentary press of the bottom side • bottom side function button. function button will cause the radio to beep the CTCSS/DCS tone programmed •...
  • Page 15: User Programmable Key Lock

    User Programmable Key Lock The user programmable Key Lock function allows the Key Lock to be assigned to the lower side button and enabled \ disabled via the radio’s controls without the use of a computer. Checking The Status Of The Key Lock To check whether the key lock is currently enabled or disabled: •...
  • Page 16: Cloning Your Radio

    Radio Cloning HT446E Radio cloning allows you to copy the programmed channel and button setup information from a ‘master’ radio into other unprogrammed radios without the use of a PC. Cloning is performed by connecting two radios together using a HTCL cloning lead.
  • Page 17: Frequency & Tone Table 16

    Frequency Table Frequency Beeps • 446.00625 MHz • • 446.01875 MHz • • • 446.03125 MHz • • • • 446.04375 MHz • • • • • 446.05625 MHz • • • • • • 446.06875 MHz • • • • • • • 446.08125 MHz •...
  • Page 18 DCS (DPL) Tone Table Beeps Beeps Beeps ▬ ● ▬ ● ▬ ●...
  • Page 19 Intentionally Left Blank...
  • Page 20: Ht446L

    HT446L All the features of the HT446E (see page 10) plus the following: Standard Features: • LCD Display • Up to 255 programmable channel positions (8 RF channels) • Low battery indication on LCD dispaly • Battery count is displayed at switch on •...
  • Page 21: Controls & Indicators

    Controls & Indicators Dealer Volume control programmable button 3 Antenna Dealer programmable LED indicator button 1 Push To Talk (PTT) button Channel / Scan Dealer control programmable button 2 Speaker On / Off Microphone On / Off button. Press to turn radio on, press and hold to turn off. Press up / down buttons to change (This can be dealer configured to be volume control).
  • Page 22: Lcd Indicators

    LCD Indicators • Key Bleeps Off • Keypad Locked • Bluetooth device connected • Accessory Connected • VOX Enabled • Scramble Enabled • Battery State • Receive strength...
  • Page 23: Programming Your Radio

    Programming your HT446L radio The radio’s frequency and tone configuration can be changed in user programming mode.This will allow you to put any of the standard frequencies or tones in to any channel position.When a radio has been configured this information can be quickly and easily cloned into other units using an optional cloning cable.
  • Page 24: User Programmable Key Lock

    User Programmable Key Lock The user programmable Key Lock function allows the Key Lock to be assigned to the lower side button and enabled \ disabled via the radio’s controls without the use of a computer. Checking The Status Of The Key Lock To check whether the key lock is currently enabled or disabled: •...
  • Page 25: Cloning Your Radio

    Radio Cloning HT446L Radio cloning allows you to copy the programmed channel and button setup information from a ‘master’ radio into other unprogrammed radios without the use of a PC. Cloning is performed by connecting two radios together using a HTCL cloning lead. How to clone a radio Connect the HTCL lead to the accessory socket on both radios.
  • Page 26: Default Channel Configuration

    Default Channel Configuration The HT446 hand portable radio has been factory programmed with the default frequencies in the table below. This configuration may offer compatibility with other brands of PMR446 radio but can be altered by your dealer to match any existing PMR446 equipment. Ch.
  • Page 27: Troubleshooting Guide

    Incompatible accessory Replace with genuine accessory Radio emits constant tone Incompatible battery fitted Replace with genuine Entel battery when switching on Radio emits 5 short beep tones Battery has used almost all Prepare to replace battery when switched on...
  • Page 28 Notes Use this page to record important information, such as the serial number of your radio and any private channels programmed by your dealer etc.
  • Page 29 Notes...
  • Page 30 ‘the professional’s choice’ <Intended Country Of Use> Registered Community Design Application 000810890 U.S. Design Patent Pending No. 29/182,829 Copyright and Unregistered Design Right Entel UK 2009 All rights reserved Headquarters: United Kingdom www.entel.co.uk...

This manual is also suitable for:

Ht446l

Table of Contents