Display Symbols; Display Messages - Setra Systems L Series User Manual

DISPLAY SYMBOLS

OK
INT
APW
PC
oz
lb
t oz
dwt

DISPLAY MESSAGES

bUSY
UnAbLE
OFLO
FLASHING
DISPLAY
Reading on balance is stable. Further operations may be
performed.
Balance is operating in the fast integration mode, for use when
filling containers to a target weight, or in the slow integration
mode for use when vibration is present.
Reading given in "aggregate percent weight." This is the
weight equivalent to 100% when using the percent function.
Reading shown is given in percent.
g Reading shown is given in grams.
Reading shown is given in ounces (avoir-dupois).
Reading shown is given in pounds.
Reading shown is given in troy ounces.
Reading shown is given in pennyweights.
c Reading shown is given in carats.
t Reading shown is given in user-definable, tamperproof units.
Note: t units are preset by the factory in grains (15.4326 = 1
gram).
X Reading shown is given in user-definable units.
Note: X units are preset at the factory to grams.
The balance is developing a stable reading.
The balance is unable to complete your requested function.
Clear the display, and select another function.
The number in the display exceeds six digits. Remove some of
the weight or formulate and weigh in smaller batches. Press
clear to continue.
The weight on the pan exceeds the capacity of the instrument.
Remove some of the weight to continue.
8