Setra Systems L Series User Manual page 12

5. Press the % key. The display now reads in percent.
6. Press the int key to select the fast update rate for filling operations.
7. Add a substance until the desired percentage is reached and the "OK" symbol
appears.
8. Press the tare key.
9. Repeat Steps 8 and 9 until all substances have been added.
10. Press clear to return to weighing.
11. Press the int key to return to the normal weighing mode.
To display the target weight (or aggregate percent weight), press — then %. To return
to percentage weighing, using the same APW, repeat Steps 3-5 above.
FILLING TO 100%
You may specify a weight as a given percentage of a total. To fill to 100%, proceed as
follows:
1. Place a container on the pan.
2. Press tare.
3. Place the substance or solute to be specified as a percentage on the pan.
4. Enter the percentage of the total.
5. Press the "%" key. The display will show the entered percentage.
6. Press the int key to select the fast update rate for filling operations.
7. Fill the container (with solvent) until the display reads "100.00 pc" and the "OK"
symbol appears.
8. Press clear to return to weighing.
9. Press the int key to return to the normal weighing mode.
12