Mix Mode - Roland Super JX-10 Owner's Manual

MIXER
This is where the volume balance of the DCO-1 and DCO-2 is controlled.
P a r a m e t e r
Display
Number
MIX DCO 1
41
DCO-1 Level
MIX DCO 2
42
DCO-2 Level
MIX ENV
43
DCO-2 Envelope Depth
MIX DYNA
44
DCO-2 Dynamics Range

MIX MODE

45
DCO-2 Envelope Mode
Data
Value
This adjusts the level of DCO-1
00
This adjusts the level of DCO-2
99
When ENV controls the DCO-2's level, this sets the
amount of ENV signal
When the DC0:2's level is controlled by ENV Depth
3
and then by Dynamics, this sets the sensitivity of the
2
Key Touch (Note 1)
1
off
This selects the polarity of the Envelope curve.
-1
Normally, is used.
pattern will be inverted.
-2
-2
-2
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 24 of 53
F u n c t i o n
In mode,
Programmer
ADSR