Suspend Mode
The terminal goes into Suspend Mode automatically when
the terminal is inactive for a programmed period of time.
You can program this time on the Advance tab of the
Power System Setting. For additional information, refer to
the Dolphin 99EX User's Guide located on the Web at
www.honeywellaidc.com.
To put the terminal into Suspend Mode manually, press
the Power key
To wake the terminal from Suspend Mode, press the
Power key
Note: You should always put the terminal in suspend mode before
removing the battery door. For information on how to
remove the battery
and the screen goes blank.
or SCAN key
see page
SCAN
.
6.
7