Attaching the Connector Cover
When using the connector cover to protect the cables, attach the connector cover.
Follow the steps below to attach the connector cover to protect cables.
The connector cover has 3 cable exits in different directions. When pulling out the cables
whose connector does not lock itself (USB cable and DC 5 V cable) from the cable exits on
the back, fix the cables with the cable band to prevent the cables from coming off.
1
Turn over the printer.
2
Position the two hooks on both sides of the connector cover so that they
hook the printer case.
3
Push the connector cover down to click onto the printer case.
Hooks
Chapter 2 Setup
Cable band
2
61