Connectors; Push Button - Epson TM-T88V-i Technical Reference And User's Manual

Connectors

All cables are connected to the connector panel on the lower rear of the printer.
Drawer kick-out
connector
Ethernet connector
USB connectors
(for optional products)
• Drawer kick-out connector:
• Ethernet connector:
• USB connector:
• Power supply connector for DC 5V: Connects a power supply unit.
• Power supply connector for DC 24V:Connects a power supply unit.
*1: Analog RGB connector (Currently not available.)
*2: Micro SD card slot (Currently not available.)
For details on how to connect the power supply connector and cash drawer, see
"Connecting the Printer to the System" on page 51
page

Push Button

The push button on the lower rear of the printer prints a status sheet or initializes the printer.
• Status sheet printing:
Make sure the printer is turned on, press the push button for approximately 3 seconds. When
you release the button, a status sheet on which network parameters are printed will be ejected.
(See "Confirming with a status sheet" on page
• Initialization:
Make sure the printer is turned on, press the push button for approximately 10 seconds. When
you release the button, all setting will be initialized. (See
page 76.)
Protective cover
*1
Power supply
connector for DC 5V
Connects a cash drawer or the optional buzzer unit.
Connects the printer with a host computer.
Connects optional products.
56.
Chapter 1 Product Overview
*2
and "Connecting the Cash Drawer" on
Push button
71.)
"Initializing the Network Setting" on
Micro-USB (Type AB)
connector (for setting)
USB connector
(for optional products)
Power supply
connector for DC 24V
19
1