Attaching Label; Turning The Power Off - Epson LABELWORKS PX User Manual

6. Attaching label

1. Peel off the backing paper.
2. Attach the label and rub it firmly.
CAUTION
Depending on the environment where you use labels and
the nature of the adhered surface, the labels may be peeled
or discoloured, and the adhesive may remain on or damage
the adhered surface. Be sure to check the environment and
the nature of the adhered surface before use. K-Sun takes
no responsibility for any damage or loss due to the above
mentioned causes.

7. Turning the Power Off

1. Press .
The characters you have entered in the current session
are stored even after the printer is turned off. They are
displayed when it is turned on again.
2. When using the AC adapter, unplug the power cable
from the outlet and disconnect the AC adapter plug
from the printer.
CAUTION
• "Powering off." is displayed while turning off this printer. Do
not remove the batteries or disconnect the AC adapter until
this message disappears.
• When you don't use the printer for a long period of time,
remove the batteries, disconnect the AC adapter, and remove
the tape cartridge from the printer.
Top
Start Here
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
15