Setting for Connected Devices
Follow the steps below to set for devices controlled by the TM-T88V-i printer by using EPSON
TMNet WebConfig.
Setting the TM-T88V-i printer itself is not possible.
You can change the device ID for the TM-T88V-i printer.
4
6
5
1
Start up a PC for setting.
2
Connect all the printers to be controlled to the network, and turn them
on.
3
Print a status sheet for each printer.
For how to print a status sheet, see
4
Start up the web browser on the PC for setting, and enter the TM-T88V-i
printer's IP address in the address bar as shown below.
EPSON TMNet WebConfig starts.
"Confirming with a status sheet" on page
http://xxx.xxx.xxx.xxx/PrinterConfigurationPage/
Chapter 2 Setup
7
71.
77
2