Electrolux EILFU17GS Technical & Service Manual page 44

C C o o m m p p o o n n e e n n t t T T e e a a r r d d o o w w n n
L L o o w w e e r r H H i i n n g g e e A A s s s s e e m m b b l l y y R R e e m m o o v v a a l l
The lower hinge assembly is secured to the
underside of the door assembly. The wire harness
for the control panel runs through the lower hinge
assembly.
To remove the lower hinge assembly:
1. Remove door from unit.
2. Extract the two screws securing the lower
hinge and door closer to the bottom of the
door assembly. (See Figure 5-5)
D D o o o o r r G G a a s s k k e e t t a a n n d d I I n n n n e e r r P P a a n n e e l l R R e e m m o o v v a a l l
The inner panel of the door assembly is secured
with screws that pass through the inner panel and
fasten into the door assembly. The door gasket
has an inner lip that is pressed between the inner
panel and the door assembly and is secured in
position when the inner panel screws are fastened
to the door assembly. The inner panel does not
have to be removed to extract the door gasket
from the door assembly.
To remove the door gasket:
1. Lift the inside edge of the door gasket to
access the inner panel screws.
2. Loosen the inner panel screws until the door
gasket can be pulled out from under the inner
panel. (See Figure 5-6)
3. Continue around door assembly until door
gasket is free.
4. To remove the inner panel, extract all screws
from the outside edge of the inner panel and
remove from unit.
Lower Hinge
Figure 5-5. Door Lock Removal
Inner Panel
Screw
Figure 5-6. Inner Panel and Door Gasket
Removal
5-4
Door Frame
Wire Harness
Screws
Outer
Door
Panel
Door
Gasket