Gps Receiver Led Indications - Raymarine RS130 GPS Installation Instructions Manual

5.1 GPS receiver LED indications

The LED on the GPS receiver indicates status information for diagnostic purposes.
LED activity (based on 1000 ms (1 second) cycle)
Off Red Orange
1000 ms 0 ms 0 ms
900 ms 100 ms 0 ms
500 ms 500 ms 0 ms
0 ms 500 ms 500 ms
0 ms 500 ms 0 ms
900 ms 0 ms 100 ms
900 ms 0 ms 0 ms
1 ms 333 ms 333 ms
24
LED state description
Green
0 ms Off
0 ms Short flash red
0 ms Long flash red
0 ms Continuously alternating long flash red, long
flash orange
500 ms
Continuously alternating Long flash red, long
flash green
0 ms Short flash orange
100 ms Short flash green
333 ms Continuously alternating red, orange, green
Status Description
No power.
Power supply outside nominal voltage range.
Unit is being upgraded or is unable to boot.
Unit unable to communicate using SeaTalk
No GPS signal.
No GPS fix.
Normal operation.
Unit is in test mode.
RS130 GPS Receiver – Installation instructions
ng .