Tools - Raymarine CP100 Installation Instructions Manual

Item Description
1
Sonar module
2 RayNet cables
3 RayNet network switch
4 Radar scanner
5 Multifunction display
6 DownVision transducer
7
Evolution ACU
8 SeaTalk ng spur cable
9 Evolution EV
10 Pilot head controller
Planning the installation
Part number
Refer to Related products.
Refer to 10.4 Network
cables for RayNet cables.
A80007
Refer to your dealer for all
applicable part numbers.
Refer to your dealer for all
applicable part numbers.
Refer to 3.5 Compatible
transducers.
Refer to your dealer for all
applicable part numbers.
Refer to 10.5 SeaTalk ng
cables and accessories.
Refer to your dealer for all
applicable part numbers.
Refer to your dealer for all
applicable part numbers.

3.7 Tools

Installation of the unit requires the following tools:
1
3
Item
1
2
3
4
Note: *Drill bit size is dependent on the thickness and type of
material that the unit is to be mounted on.
2
4
D12228-2
Description
Drill
Pozidrive screwdriver
Drill bit of appropriate size*
Adhesive tape
17