Gigaset SL400A User Manual page 17

Mobile phone
Hide thumbs Also See for SL400A:
Table of Contents

Advertisement

First battery charge and discharge
The correct charge status can only be displayed if the battery is first fully charged
and discharged.
¤
Charge the handset in the charger for 3 hours.
Please note
Only place the handset in the designated charger.
¤
After charging, remove the handset from the base and only replace it when the
batteries are fully discharged.
Please note
u
Each handset is registered with the base at the factory. You do not need to
register the handset again. If you wish to use your handset with a different
base or use further handsets with your base, you will need to register the
handset manually (
u
After the initial battery charge and discharge, you may place your handset in
the base after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert them.
u
The battery may warm up during charging. This is not dangerous.
u
After a while, the charge capacity of the battery will decrease for technical
reasons.
3hours
¢
page 63).
First steps
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl400

Table of Contents