Aztech 500Mbps HomePlug AV User Manual page 8

User Manual
Label
Filtered AC Pass-Through
A
Power
B
Powerline Activity
C
D Ethernet Activity
Simple Connect Button
E
Ethernet Port
F
Reset Button
G
Page 8 of 44
Status Description/ Function
Built in AC Pass-through with Powerline Noise Filtering.
Frequency band 2-30Mhz with filtering characteristics of
-25 to -45dB. It prevents noise-generating appliances
from affecting your HomePlugAV's performance.
Only a *BS1363 plug can be plugged into socket outlet.
Blinking When LED is blinking slowly in Green color HomePlug
slowly AV is on a Power Saving status.
Off No power.

On After Simple Connect is pressed for two
seconds, this LED will blink to confirm the
button press.

When Simple Connect is pressed for 10
seconds, this LED will blink to confirm the
Private Network Name reset.
Off Device is not connected to a HomePlug AV network.

On This LED remains on when the device is part of
a HomePlug AV network.

The LED colors represents the connection rate
within the HomePlug AV network whether it is
good (red), better (amber), or best (green).

The LED flashes to indicate network activity.
Off An Ethernet device is not connected.

On An Ethernet device is connected.

The LED flashes to indicate Ethernet activity.
Press to create or join a HomePlug AV network. It can
also be used to reset the Private Network Name to a
random key.
Accepts either cross or straight Ethernet cable.
Press for 2 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.