Kärcher CV 38/2 User Manual page 13

Please read and comply with
these original operating instruc-
tions prior to the initial operation of your ap-
pliance and store them for later use or
subsequent owners.
– Before first start-up it is definitely nec-
essary to read the safety indications Nr.
5.956-249!
– The non-compliance of the operating
and safety instructions may lead to
damages of the appliance and to dan-
gers for the operator and other persons.
– In case of transport damage inform ven-
dor immediately
– When unpacking the product, make
sure that no accessories are missing
and that none of the package contents
have been damaged.
Environmental protection
The packaging material can be
recycled. Please do not throw
the packaging material into
household waste; please send
it for recycling.
Old appliances contain valua-
ble materials that can be recy-
cled; these should be sent for
recycling. Batteries, oil, and
similar substances must not
enter the environment. Please
dispose of your old appliances
using appropriate collection
systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
http://www.karcher.de/de/unternehmen/
umweltschutz/REACH.htm
Proper use
– The appliance is meant for dry cleaning
of floors and walls.
– This appliance is suited for the commer-
cial use, e.g. in hotels, schools, hospi-
20
English
tals, factories, shops, offices, and rental
companies.
Device elements
Illustration on Page 2
1 Brush cover
2 Brush
3 Brush head
4 Indicator bundle
(CV 38/2 only)
5 Unlocking brushg head
6 Upholstery nozzle
7 Crevice nozzle
8 Handle adjustment
9 Indicator lamp on the filter housing (red)
10 Handle
11 Suction hose
12 Suction pipe
13 Power switch
14 Filter bag
15 Filter cover
16 Motor filter
17 Blower filter
18 Pile height adjustment knob
19 Indicator lamp - Electronic brush control
(orange)
Operation
Electronic brush control
The electronic brush control continuously
monitors the working of the brush.
– No light
Brush is working properly.
– Orange light is glowing
Set the adjustment knob for pile height
to the lower pile height.
– Orange light also glows at lowest
level
Replace brush.
Troubleshooting
Motor does not run
– No electrical voltage.