Unit Operation; Switching On And Off; Adjusting The Temperature - A-TOUCH W-Thermo Instruction Manual

UNIT OPERATION

SWITCHING ON AND OFF

The thermostat has 4 modes:
16:29
21.2º
16:29 AUTO
21.2º
16:29 22º
21.2º
16:29 22º
20.3º
As you can see, the display contents show the mode of the unit. There is no
difference between AUTO ON and MANUAL because in both modes the unit makes
the same.
16:29
21.2º
16:29 22º
21.2º
16:35 22º
22.0º
16:36
22.0º
22º
21.9º
If the unit has the SCHEDULE function ON then it operates automatically according
to the schedule defined, switching the climatization on and off according to the
needs. You can always switch it on or off independently of the schedule.
Notes:
- In OFF mode, the unit does not control minimum and maximum
temperatures.
- In AUTO OFF mode the unit controls minimum and maximum temperature.
These settings are indepent of the week day.

ADJUSTING THE TEMPERATURE

You can adjust the target temperature when the unit is in ON mode, no matter if it
is in manual or automatic mode. The new setting will be automatically stored in the
memory.
If the unit is in an ON period, the new setting is stored in the program of that day
and that moment. If periods overlap and more than one period are active in the
info@a-touch.in.th
OFF, where the thermostat does not work at all, schedule is OFF
AUTO OFF, where the thermostat runs the program you defined but is
in an OFF period
AUTO ON, where the thermostat runs the program you defined but is
in an ON period
MANUAL, where the thermostat was manually switched ON in an OFF
period
In OFF mode the unit shows the time and temperature. If the time is
missing then the time field does not display.
To switch on, press key
- the display shows the actual temperature and the target
temperature on the top right corner.
When the target temperature is achieved, the unit will switch the
heating off.
If you wish to switch off the unit, even during the execution of the
program, just press key
- the unit goes OFF.
If you want to switch the unit ON again, just press key
- the unit goes back to ON mode and the program settings are
reloaded.
(STBY):
(STBY):
(STBY):
www.a-touch.in.th