A-TOUCH W-Thermo Instruction Manual page 3

The A-TOUCH thermostat is a unit that the following basic features:
- selectable cycle for summer (cooling) and winter (heating)
- programmable temperature schedule independent for winter and summer
- temperature scheduling with 3 ON periods for each day of the week
- programmable Minimum and Maximum temperature
- possibility to operate with different types of climatization units
- possibility to use it to drive 2 different climatization machines (1 thermostat
for 2 actuators)
Some more features are available but they will be explained in the chapter
Advanced Settings.
Configuration
The unit allows a number of configurations so that it works as you wish. These
configurations need to be made only once.
The configurations are made in MENU mode. The MENU can be accessed only if the
unit is completely OFF:
23.1º
--:--
The MENU is accessed by pressing then the key
SELECT
SCHEDULE
SELECT
CYCLE
TEMPERATURE
MINIMUM
TEMPERATURE
MAXIMUM
ADJUST
DATE TIM
PROGRAM
WINTER
PROGRAM
SUMMER
SELECT UNIT
HEATER
SELECT UNIT
COOLER
SELECT
UNIT TYP
In the menu mode, the keys have the following operation:
key
key
key
key
info@a-touch.in.th
- if the display does not show the time or --:--, hold the key
(STBY) for more than 1 second:
o the unit will switch off and the display will show the time.
to select if the schedule should run or not
to adjust the thermostat for Winter or Summer operation
to adjust the minimum temperature of the house
to adjust the maximum temperature of the house
to adjust date and time
to define the winter program
to define the summer program
to define the unit for heating
to define the unit for cooling
to define the unit type
BACK
UP
DOWN
ENTER
(VENT). The menu steps are:
www.a-touch.in.th