Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for A-TOUCH W-Thermo
- Page 1 THERMOSTAT Instruction manual 23.1º...
-
Page 2: About This Manual
At the end you will have a chapter about integration with your A-TOUCH automation system, if this is the case. The A-TOUCH thermostat is a programmable thermostat where you can schedule different temperatures for different periods of each day of the week, both for winter and summer time. - Page 3 The A-TOUCH thermostat is a unit that the following basic features: selectable cycle for summer (cooling) and winter (heating) programmable temperature schedule independent for winter and summer temperature scheduling with 3 ON periods for each day of the week programmable Minimum and Maximum temperature...
-
Page 4: Minimum Temperature
To adjust the maximum temperature proceed as follows: TEMPERATURE Press key (ENTER): MAXIMUM MAXIMUM TEMP. - the display shows the actual maximum temperature. 60º Now change with key (UP) or (DOWN) MAXIMUM TEMP. 32º info@a-touch.in.th www.a-touch.in.th... -
Page 5: Adjust Date And Time
To define the program for winter operation proceed as follows: PROGRAM WINTER Press key (ENTER): WEEK DAY - the display shows the week day Monday. You can select another MONDAY day if you like by pressing key (UP) or (DOWN). 1 START 00-00H20 info@a-touch.in.th www.a-touch.in.th... - Page 6 The unit defined as LOCAL is the actuator that is connected to the thermostat panel; the other unit is then the REMOTE actuator. The REMOTE unit has to be programmed to operate as SLAVE of the LOCAL unit. Please see the chapter USING 2 UNITS WITH 1 THERMOSTAT for more details. info@a-touch.in.th www.a-touch.in.th...
- Page 7 - the display shows the actual unit. RADIATOR Change with key (UP) or (DOWN) Confirm by pressing key (ENTER): AIR-CON1 - the display shows the time and extis the menu. Remember, the 16:30 unit is OFF if the display shows time. Notes: info@a-touch.in.th www.a-touch.in.th...
- Page 8 There will be no damage if the unit is operated with the wrong unit type selected, just you will not have the correct operation. info@a-touch.in.th www.a-touch.in.th...
-
Page 9: Unit Operation
The new setting will be automatically stored in the memory. If the unit is in an ON period, the new setting is stored in the program of that day and that moment. If periods overlap and more than one period are active in the info@a-touch.in.th www.a-touch.in.th... -
Page 10: Ventilation Speed
The AIRFLOW4 unit type only has 2 speeds, all others have 3 speeds. The transition between one speed and the next has a pause of about 1 second. This is necessary to avoid relay damage in some kinds of ventilators. info@a-touch.in.th www.a-touch.in.th... -
Page 11: Operation
COOLER unit: With the local unit if LOCAL With the remote unit if REMOTE With both units if BOTH No operation if NONE The operation is the same if the unit operates with a local, remote or both units. info@a-touch.in.th www.a-touch.in.th... -
Page 12: Integration With Domotics
INTEGRATION WITH DOMOTICS The A-TOUCH thermostats can be integrated in a home automation system, enabling association with scenarios, remote switch on and off, both from a light switch or your smart-phone APP. For that, the unit has to be connected to the communication bus of the automation system. - Page 13 (VENT) pressed together for more than 5 21.2º seconds on the thermostat panel: 22º º 21.2 - you will hear 2 short BEEPs on the panel: the display layout changes to Automation mode. Now you can use the keys of the thermostat for automation. info@a-touch.in.th www.a-touch.in.th...
- Page 14 Automation. º 21.2 To put back the panel in Thermostat mode proceed the same way: - you will hear 2 BEEPs on the panel and the display layout changes 22º 21.2º back to the thermostat layout. info@a-touch.in.th www.a-touch.in.th...