Download Print this page

OBH Nordica 9960 Instructions For Use Manual page 18

Electric knife sharpener
Hide thumbs Also See for 9960:

Advertisement

Available languages
  • EN

Available languages

If you press too hard the blade of the knife will run against the black edge
of the wheel and this may cause marks on the blade. This applies
especially knives with frosted/matt blades.
Wipe off the knife-blade after the sharpening is finished.
Never stick your fingers into the rotating wheel.
The sharpening-wheel works on both stainless steel and carbon steel.
Do not use with serrated knives.
Cleaning
Wipe off the outer housing with a damp cloth and dry.
The sharpening-wheel can be cleaned with a small brush (for ex. a tooth-
brush) that is held towards the wheel while rotating.
If you wish to remove eventual grinding dust that is collected inside the
knife sharpener, unscrew the lid positioned underneath the appliance and
shake out and/or use a vacuum cleaner to suck out eventual dust from the
opening. Always unplug from the mains supply before the lid is being
removed!
Put back the lid and tighten the screws.
Safety instructions
1.
Read the instruction manual carefully before use, and save it for
future use.
2.
Plug the appliance to a household outlet of 230V only, and use the
appliance only for the intended use.
3.
Always unplug the appliance from the mains supply when disorder
is experienced, when not in use, when parts are applied or
removed from the appliance and before cleaning and maintenance.
4.
The appliance must not be immersed into water or other liquids.
5.
An electrical appliance is not a toy, and should therefore always be
placed outside the reach of children. Children are not always able
to understand potential risks. Teach children a responsible hand-
ling of electrical appliances.
6.
Check that the cord is not hanging over the edge of the table.
18

Advertisement

loading

This manual is also suitable for:

Pro sharp 9960