RIDGID CM1450 Owner's Manual page 28

© 2001 Emerson
Part No. SP6450
What is covered
RIDGID® tools are warranted to be free of defects in
workmanship and material.
How long coverage lasts
This warranty lasts for the lifetime of the RIDGID® tool.
Warranty coverage ends when the product becomes
unusable for reasons other than defects in workmanship
or material.
How can you get service
To obtain the benefit of this warranty, deliver via prepaid
transportation the complete product to RIDGE TOOL COM-
PANY, Elyria, Ohio, or any authorized RIDGID® INDEPEN-
DENT SERVICE CENTER. Pipe wrenches and other hand
tools should be returned to the place of purchase.
What we will do to correct problems
Warranted products will be repaired or replaced, at
RIDGE TOOL'S option, and returned at no charge; or, if
after three attempts to repair or replace during the war-
ranty period the product is still defective, you can elect to
receive a full refund of your purchase price.
What is not covered
Failures due to misuse, abuse or normal wear and tear are
not covered by this warranty. RIDGE TOOL shall not be
responsible for any incidental or consequential damages.
How local law relates to the warranty
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limita-
tion or exclusion may not apply to you. This warranty
gives you specific rights, and you may also have other
rights, which vary, from state to state, province to prov-
ince, or country to country.
No other express warranty applies
This FULL LIFETIME WARRANTY is the sole and exclu-
sive warranty for RIDGID® products. No employee, agent,
dealer, or other person is authorized to alter this warranty
or make any other warranty on behalf of the RIDGE TOOL
COMPANY.
Catalog No. CM1450
Model No. CM14500 Serial No. ________
Model and serial numbers may be found on a plate
attached to the saw, on top of the Cut-Off Saw arm.
You should record both model and serial numbers
in a safe place for future use.
QUESTIONS OR COMMENTS?
CALL 1-800-4-RIDGID
www.ridgidwoodworking.com
Please have your Model Number and Serial
Number on hand when calling.
Form No. SP6450
RIDGID Power Tools
Emerson Electric Co.
Printed in Taiwan 11/01