RIDGID CM1450 Operator's Manual
  1. Manuals
  2. Brands
  3. RIDGID Manuals
  4. Saw
  5. CM1450
  6. Operator's manual
RIDGID CM1450 Operator's Manual

RIDGID CM1450 Operator's Manual

14 in. abrasive cut-off machine
Hide thumbs Also See for CM1450:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Operator's Manual
Your new cut-off machine has been engineered and manufactured to our high standards for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
14 in. ABRASIVE
CUT-OFF MACHINE
CM1450

Advertisement

Table of Contents
loading

Related Manuals for RIDGID CM1450

Summary of Contents for RIDGID CM1450

  • Page 1 When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product. SAVE THIS MANUAL FOR FUTURE REFERENCE...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS n Introduction ..................................2 n General Safety Rules ..............................3-4 n Specific Safety Rules..............................4-5 n Symbols..................................6-7 n Electrical ................................... 8 n Features ..................................8-10 n Unpacking ..................................11 n Loose Parts..................................11 n Operation ...................................12-14 n Adjustments................................15-17 n Maintenance ................................... 18 n Troubleshooting ................................

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES n ALWAYS WEAR SAFETY GLASSES WITH SIDE WARNING: SHIELDS. Everyday eyeglasses have only impact- resistant lenses; they are NOT safety glasses. Read and understand all instructions. Failure to n SECURE WORK. Use clamps or a vise to hold work follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

  • Page 4: Specific Safety Rules

    ALWAYS SUPPORT LONG MATERIAL. To minimize risk for damage. of tipping machine, always support long material. n WHEN SERVICING USE ONLY IDENTICAL RIDGID n BEFORE MAKING A CUT, BE SURE ALL ADJUST- REPLACEMENT PARTS. Use of any other parts may MENTS ARE SECURE.
  • Page 5 SPECIFIC SAFETY RULES n BEFORE CUTTING press the trigger switch and allow n ALWAYS STAY ALERT! Do not allow familiarity (gained the cut-off wheel to reach full speed. from frequent use of your cut-off machine) to cause a careless mistake. ALWAYS REMEMBER that a careless n MAKE SURE THE WORK AREA HAS AMPLE LIGHTING fraction of a second is sufficient to inflict severe injury.

  • Page 6: Symbols

    SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz...
  • Page 7 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

  • Page 8: Electrical

    ELECTRICAL EXTENSION CORDS GROUNDING INSTRUCTIONS Use only 3-wire extension cords that have 3-prong ground- In the event of a malfunction or breakdown, grounding pro- ing plugs and 3-pole receptacles that accept the tool's plug. vides a path of least resistance for electric current to reduce When using a power tool at a considerable distance from the the risk of electric shock.

  • Page 9: Features

    FEATURES PRODUCT SPECIFICATIONS n Input......120V, 60 Hz, AC Only,15 Amperes n Fence Angle........Right (45˚), Left (0˚) n No Load Speed..........3900/min. n Vise Clamp Angle ......Right (45˚), Left (45˚) n Arbor Diameter ........1 in. (25.4 mm) n Maximum Cutting Capacities: n Wheel Diameter ........

  • Page 10: Carrying Handle

    FEATURES KNOW YOUR CUT-OFF MACHINE TRANSPORT CHAIN See Figures 2 - 4. The cut-off machine can be locked in the lowered position for compact storage. The chain is only used during carrying Before attempting to use your machine, familiarize yourself with all operating features and safety requirements.

  • Page 11: Unpacking

    This is a heavy machine. To Contact your nearest RIDGID dealer or call 1-866-539-1710 avoid back injury, get help when needed. for assistance if any parts are missing or damaged.

  • Page 12: Operation

    OPERATION n To prevent machine movement or tipping during cutting WARNING: operation, secure cut-off machine in place to a workbench Do not allow familiarity with tools to make you or work surface that is also secure. careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
  • Page 13 OPERATION CUT-OFF obtain a uniform cut through the material. Never force the wheel into the material being cut. See Figures 7 and 8. A cut-off is made by cutting across the width of the material. n When the cut is complete, release the on/off switch and A straight crosscut is made with the adjustable fence set at allow the wheel to stop rotating before raising the wheel the zero degree position.
  • Page 14 OPERATION TO USE THE QUICK LOCK-RELEASE LEVER MITER ENGAGED VISE AND VISE CLAMP LOCK (TIGHTEN) CLAMP NOT ENGAGED HANDLE To Loosen: (LOOSEN) VISE See Figure 9. SCREW WARNING: TO LOOSEN Failure to unplug cut-off machine could result in accidental starting causing possible serious per- sonal injury.

  • Page 15: Adjustments

    ADJUSTMENTS n Unplug your cut-off machine. WARNING: n Push down on "D" handle (machine arm) and remove To prevent accidental starting that could cause transport chain from hook on motor housing to release possible serious personal injury, assemble all machine arm. parts to your cut-off machine before connecting n Raise machine arm to its full raised position.
  • Page 16 ADJUSTMENTS SCREW TO ADJUST WIDTH OF CUT SHAFT See Figure 12. STATIONARY VISE WARNING: Failure to unplug cut-off machine could result in accidental starting causing possible serious personal injury. The stationary vise can be repositioned by removing the vise adjustment bolt. MITER n Unplug your cut-off machine.
  • Page 17 ADJUSTMENTS TO ADJUST DEPTH STOP CAUTION: See Figure 14. Do not start your cut-off machine without check- The depth stop limits the wheel's downward travel. It ing for interference between the wheel and the allows the wheel to go below the machine base enough to machine base support.

  • Page 18: Maintenance

    If operation is dusty, also wear a n Tighten brush cap securely. Do not overtighten. dust mask. WARNING: To ensure safety and reliability, all repairs — with the exception of the externally accessible brushes — should be performed by a RIDGID Authorized Service Center.

  • Page 19: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTION Machine does not start 1. Power cord not plugged in. 1. Plug in cord. 2. Power cord is damaged. 2. Have the cord replaced at your nearest authorized service center. 3. Circuit breaker is tripped. 3. Reset circuit breaker. 4.
  • Page 20 NOTES...

  • Page 21: Warranty

    This warranty covers all defects in workmanship or materials disclaimed. Any implied warranties, including warranties of in this RIDGID tool for the three year period from the date of merchantability or fitness for a particular purpose, that cannot purchase. This warranty is specific to this tool. Warranties be disclaimed under state law are limited to three years from for other RIDGID products may vary.

  • Page 22: Parts Ordering/Service

    CM1450 CUSTOMER SERVICE INFORMATION For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

Table of Contents