Remote Control - Hisense K660HK3D series User Manual

Remote Control

CRF6B16 is a kind of multi-functional network remote controller for the network TV set as a complex of keyboard,
air mouse and OFN touch panel. It is to control other functions through the RF (radio frequency) mode. RF receivin
terminal (dongle) is embedded in TV set. The controller cannot be used before code matching. For the code
matching operation¡ ¯ s detailed steps, please see " c ode matching" later.
Power key
Enter standby/ex i t standby
Setting key
Start/stop quick setup menu
Power indicator
Volume down key
▲/▼/◄/►
Up/down/left/right key
Channel up/channel down key
/
Rewind/fast-forward key (see
" A dvanced Features" ) £ ©
Note: this region for reuse key
Menu key
Numeric key
Select channel/input character
Quantity description
When it is lack of electricity, the power
indicator light (red) is shining, suggesting
lack of electricity, please give timely charging
of the battery, when the electricity shortage
is serious, all indication lamps are off, and
press any key, there will no any reaction.
Battery's charging method
The remote control is embedded with
rechargeable lithium battery, while charging,
please connect one end of power line to
USB port¡ ¯ s ex t ernal device, the other end
is connected to the remote control ¡ ¯ s USB
port for charging. When charging, the power
indicator light (red light) will be on for long,
G e t t i n g S t a r t e d
key
key
/–
key
after the completi on of charging, the power
indicator lamp will be off.
Matters needing attention
¡ ¤
Because of the limitation of rechargeable
battery charging cycle, after being used for a
long time, if after the battery is fully charged,
the time is obviously shortened, please call
Hisense¡ ¯ s authorized service provider for
replacement, the user cannot disassemble
it automatically to replace the battery, if the
battery replacement is improper, there will be
danger of e x p losion.
¡ ¤ Range of charging voltage of remote control
is DC 5V.
6
CRF6B16
Mute key
Start/ex i t the mute state
Code matching indicator
Volume increasing key
OK key /OFN
Confirm /pause or play/sliding screen
Return key
Return to previous menu
Home key
To enter the television¡ ¯ s main
interface
USB charging port
¡ ¤ When it is used for the first time, there is
need to charge the device for 8 hours, then
it will be charged as needed.
¡ ¤
If you do not use the remote control for
long time or the battery runs out, please
charge, the power indicator light (red) may
be suspended for shining, during charging,
please stop using.
¡ ¤ While charging or long time use of device,
the surface may be heating, which is a
normal phenomenon.
¡ ¤ If the remote control encounters
malfunction, please re-match the code
according to the ex p lanation.