Connection & Pin Assignment - Wide IDP2310UX User Manual

Standard: IEC type connector

1.1.7.2 Input signal connectors
Analog Input: 5 Coaxial BNC connectors for R, G, B, HS and VS

Digital input: DVI-D connectors

CVBS input: RCA connectors

S-video input: 4pin mini DIN connectors

1.1.7.3 Interface connectors for remote control
RS-422 port:

RS-232 or RS-485 port:

RS-485 port:

1.1.8 Connection & PIN Assignment
Power Input / output
Analog Input (BNC)
Analog Input (D-Sub)
Revision Status
V2.2
Title
Sub D, 9p, Female
Sub D, 9p, Female
Sub D, 9p, male
IDP2310UX
(AL23PUX)
(for JH protocol)
(for JH protocol)
(for Inter-Monitor communication)
● 90-264Vac, 47~63Hz with double pole / neutral fusing,
250V F3.15AL
● Disconnect power before changing fuse
● Chain thru power output to limit to one level totally
● R : Analog Red Signal Input (0.7 Vpp, 75 ohm)
● G : Analog Green Signal Input (0.7 Vpp, 75 ohm)
● B : Analog Blue Signal Input (0.7 Vpp, 75 ohm)
● HS : Horizontal Sync Signal Input (TTL)
● VS : Vertical Sync Signal Input (TTL)
● Connection Type : 5 x BNC
● Connection Type : 15p D-aub Female (Analog only support)
1. Red
2. Green
3. Blue
4. Ground
5. DDC Ground
6. Red Ground
7. Green Ground
8. Blue Ground
9. back up
10. sync Ground
11. Ground
12. DDC Data
13. H sync
14. V sync
15. DDC Clock
Page No.
11 / 44
Issued Date
2009-2-20