Night View Assist Plus; 360° Camera; Important Notes - Mercedes-Benz Comand Operating Instructions Manual

360° camera
56
previously selected display as soon as you
shift out of reverse gear.
i
For further information on the rear view
camera, see separate vehicle Operator's
Manual.
Press the W function button.
X
The system menu appears.
Select Settings
X
COMAND controller and press W to
confirm.
Select Rear View Camera
X
confirm.
Select Activation by R gear
X
W to confirm.
The function is switched on O or off ª,
depending on the previous status.

Night View Assist Plus

On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
Switch on COMAND (
X
Activate Night View Assist Plus, see the
X
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
To adjust the brightness: select
X
Brightness by turning cVd the COMAND
controller and press W to confirm.
Turn cVd the COMAND controller and
X
press W to confirm.
To switch off the display: select
X
press W to confirm or press the k
button.
360° camera

Important notes

The 360° camera is only an aid. It is not a
replacement for your attention to your
by turning cVd the
and press W to
and press
page 29).
Y
Back and
immediate surroundings. You are always
responsible for safe maneuvering and
parking. When maneuvering or parking, make
sure that there are no persons, animals or
objects in the area in which you are
maneuvering.
Overview
The 360° camera surveys the vehicle
surroundings and assists you, for example
when parking or at exits with reduced
visibility.
The 360° camera images can be shown in full
screen mode or in seven different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
Displaying the 360° camera image
The 360° camera image can be displayed if:
your vehicle is equipped with a 360°
R
camera
COMAND is switched on (
R
the 360° Camera function is activated
R
You can activate the 360° display by:
engaging reverse gear (only possible if the
R
Activation by R gear
activated)
selecting the 360° Camera
R
the System menu
pressing and holding the W function
R
button
As soon as your vehicle exceeds a speed of
19 mph (30 km/h) with the function
activated, the function switches off. The
COMAND display switches back to the
previously selected view.
You can also switch the display by selecting
the & symbol in the display and pressing
W the COMAND controller.
page 29)
Y
option is
menu item in