Basic Comand Functions - Mercedes-Benz Comand Operating Instructions Manual

Selecting a menu item
Select the station by turning cVd the
X
COMAND controller and press W to
confirm.
The station is set.

Basic COMAND functions

Switching COMAND on/off
Press the q control knob.
X
When you switch on COMAND, a warning
message will appear. COMAND calls up the
previously selected menu.
If you switch off COMAND, playback of the
current audio or video source will also be
switched off.
Switching the sound on or off
Audio/video source sound
Press the 8 button on the COMAND
X
controller or on the multifunction steering
wheel.
The sound from the respective audio or
video source is switched on or off.
i
When the sound is switched off, you will
see the , symbol in the status bar. If you
change the audio or video source or change
the volume, the sound is automatically
switched on.
Basic COMAND functions
i
Even if the sound is switched off, you will
still hear navigation system
announcements.
Switching off navigation
announcements
Navigation announcements: press the
X
8 button during the announcement.
Switching navigation announcements
back on
Press the 8 button again.
X
The navigation announcements are active
again:
if COMAND is switched off/on with the
R
q control knob.
or after starting route guidance
R
Adjusting the volume
Adjusting the volume for the audio or
video source
Turn the q control knob.
X
or
Press the W or X button on the
X
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
navigation announcements
R
phone calls
R
voice output of the Voice Control System
R
(see the separate operating instructions)
29