Your Comand Equipment; Display Settings; Time Settings - Mercedes-Benz Comand Operating Instructions Manual

Time settings

42

Your COMAND equipment

These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your COMAND
system may not be equipped with all the
features described.

Display settings

Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
Press W.
X
Select Settings
X
COMAND controller and press W to
confirm.
Select Display
X
Select Brightness
X
confirm.
Adjust the brightness by turning cVd the
X
COMAND controller and press W to
confirm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
by turning cVd the
and press W to confirm.
and press W to
design by manually selecting day or night
design, or opt for an automatic setting.
Press W.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Display and press W to confirm.
X
Select Day Mode, Night Mode
X
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic If the
is selected, COMAND
evaluates the readings
from the automatic
vehicle light sensor and
automatically switches
between the display
designs.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
change the time in minute increments. The
date can also be changed.
i
If you adjust the time in minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost. Switching between
summer and standard time (
or
Automatic setting
page 43).
Y