IBM 5150 Hardware Reference Manual page 65

In APA mode, there are two resolutions available; 320x200 and
640x200. In the 320x200, each (picture element) pel may have one of
four colors. The background color (color 0) may be any of the 16
possible colors. The remaining 3 colors come from one of the two
software selectable palettes. One palette contains red/green/brown,
the other contains cyan/magenta/white.
~
The 640x200 mode is only available in black and white since the full
16KB of storage is used to define the on or off state of the pel.
The adapter operates in noninterlace mode at either 7 or 14 megahertz
(Mhz) video bandwidth depending on the mode of operation selected.
In
NN
mode, characters are formed from a ROM character generator.
The character generator contains dot patterns for 256 characters.
The character set contains the following major grouping of characters.
Sixteen special characters for game support, 15 characters for support
of word processing editing functions, the standard 96 ASCII graphic
set, 48 characters to support foreign languages, 48 characters for
business block graphics allowing drawing of charts, boxes and tables
using single and double lines, 16 of the most often used Greek
characters, and 15 ofthe most often used scientific notation characters.
The Color/Graphics Monitor Adapter function is packaged on a single
card which fits into one of the five System Expansions Slots on the
r"'\
System Board. The direct drive and composite video ports are right ­
angle mounted connectors at the rear ofthe adapter and extend through
the rear panel of the System Unit.
The display adapter is implemented using a Motorola 6845 CRT
controller device. This adapter is highly programmable with respect to
raster and character parameters. Thus, many additional modes are
possible with clever programming of the adapter. A block diagram of
the Color/Graphics Adapter is on the following page.
2-46