Table of Contents
Advertisement
1
Getting Started
You will need the following items to get started:
•
A desktop or laptop computer
•
Two ethernet cables (one ethernet cable is shipped with the
Blocker, and you must provide the second).
•
Web browser
•
Network information for "Go Live" configuration (Step 10):
•
MX records. Determine where your current MX records point.
•
NAT settings. Determine where your Port 25 traffic is sent.
•
Firewall settings. Determine the firewall ports you may need
to open.
Before you begin, write down the following information about
your network and administrator settings. You will need to enter
this information when running the System Setup Wizard, starting
on Step 8.
NETWORK SETTINGS
Blocker Hostname __________________________________________________
Blocker IP Address__________________________________________________
Subnet Mask _______________________________________________________
Gateway IP Address ________________________________________________
LOCAL DNS SERVER INFORMATION
Primary DNS Server IP Address ______________________________________
Secondary DNS Server IP Address ___________________________________
MAIL CONFIGURATION SETTINGS
Accept email for the following domains _______________________________
Mail Server _________________________________________________________
ADMINISTRATOR SETTINGS
Administrator Email _________________________________________________
Administrator Username ____________________________________________
Administrator Password _____________________________________________
in the
Cisco Spam & Virus Blocker • 1 Ethernet Cable
box
Rail Kit • T-Shirt • Documentation CD
- Cisco Spam & Virus Blocker -
admin (non-configurable)
Quickstart Guide • FAQ
Advertisement
Table of Contents
