Cisco Spam Quick Start Manual page 7

The Blocker has two network ports: Data 1 and Data 2.
management: 192.168.42.42
47-21639-01
For the purposes of setup, connect to Data 1 as your management
interface and configure incoming email on the Data 2 interface.
You can change these settings after the initial installation if you wish.
Connect to the Blocker
DATA 1
DATA 2
incoming email
- Quick Start Guide -
Connect the
Data 1 port to your
computer using an
ethernet cable.
Connect the
Data 2 port to the
network using an
ethernet cable.
6