Kodak Ektalite 2000 Operating Manual page 37

Maintenance
Thermal Fuse
Your projector has three thermal fuses that cut off power if overheating
occurs due to ventilation blockage or exhaust fan or motor failure.
A
warnins
Always switch off the projector and unplug the main lead before
replacing a fuse ! Avoid the risk of fire, replace only with a fuse of same
type and rating!
If you replace the fuse yourself, you do not need to open the casing.
Simply pull out the fuse holder, remove the blown fuse and fit the
required replacement.
4098*008i
This projector accepts the following fuses:
I xT2.5 A slow blod250 Y for 220,230, aurtd 240 V
1 x 5 A slow blow/250 V for 100. 115. and 130 V
KODAK EKTALITE Slide Projectors
77