Kodak Ektalite 2000 Operating Manual page 23

Operation
Use this receptacle for:
. a low-voltage power supply
. automatic "return-to-zero" devices
. a dark shutter switch
The receptacle accepts t2-pin plug, DIN 41622. (See Chapter 7 for
contact identification descriptions.)
Using a Dissolve Gontrol
Use a dissolve control to softly fade into slide projection with one or
more projectors. This feature fades down the light beam in one projector
while changing the image and fading up the light beam in the other
projector. This eliminates a dark-screen interval.
When using a two-projector dissolve control, you need to divide your
slides into two trays (odd- and even-numbered slides).
The dissolve control has two connectors that plug into the remote-
control receptacles in the rear of two projectors. Refer to your dissolve-
control operating manual for additional instructions and features.
See your dealer in Kodak products or a Kodak representative in your
country for more information on Kodak dissolve controls.
KODAK EKTALITE Slide Projectors
63