ffiafuitenrc
I
L
1
t_
I
i_
I
I
t_
I
L
L
L
L
t_
L
L
I
l_
L
L-
L
To replace only the lamp, liftup the lamp release clip. Carefully remove
the worn lamp from the socket and place it on a heat-resistant surface.
Insert the new lamp into the socket. Push down to tightly seat the
replacement lamp. Do not use the clip to seat the lamp.
Push the lamp rnodule all the way back into the projector until it latches.
Three lamps can be used for replacement:
EXR 82 V/35H 300 W (maximum brightness, 35 hours at HI)
FHS 82 Vl7Otl 300 W (medium brightness, 70 hours at HI)
EXY 82 V{2WH250 W (low brightness, 200 hours at HI)
KODAK EKTALITE Slide Projectors
71