Advertisement
CarShow Installation Guide - Ford Mustang
OEM Radio Bezel Disassembly
You will need to disassemble the OEM radio bezel and prepare for re-install onto CarShow radio
OE
OEM and Rosen Bezel Preparation
OEM Radio Bezel on right
OE
OEM Radio Face Assembly
Remove 15 x T10 torx screws to remove OEM Radio face
Assembly. Screw locations highlighted in Yellow at right.
Be sure to place screws in a safe place as they will need to be
OE
OEM Radio Control Assembly
Radio Control assembly shown removed from Bezel at right.
OE
OEM Radio Bezel Clips
Remove plastic yellow clips from OEM radio bezel and
relocate onto Rosen radio bezel.
CarShow
Installation Guide
bezel
re-installed.
STEP
6
Copyright 2013 All Rights Reserved
CS-MUST-IG Rev A
Page 9
Advertisement
