Advertisement
CarShow Installation Guide - Ford Mustang
OEM Radio/SYNC Display Removed
OEM Radio/SYNC display removed at right
Preparing OEM SYNC Display
STEP
You will need to prepare the OEM SYNC display to put back into dash.
4
The following steps will help guide you through this process.
Locate Included Foam Piece
Foam piece for OEM SYNC display is shown at right
Cut Adhesive Backing
Cut ½" of adhesive backing at top and bottom as shown
at right.
DO NOT cut any more than ½" of adhesive backing!
Place SYNC Display On Foam
Place display onto foam and be sure that it is lined up
correctly as shown at right.
CarShow
Copyright 2013 All Rights Reserved
Installation Guide
CS-MUST-IG Rev A
Page 7
Advertisement
