Advertisement
CarShow Installation Guide - Ford Mustang
Remove OEM Sync Display
Remove 4 x 7mm bolts to remove Sync display
Remove SYNC Display
Carefully remove/unplug OEM SYNC display
Harness is extremely short so use
**NOTE:
caution
Unplug harness
Carefully unplug data harness from back of Sync
Remove Right SYNC Display Bracket
Carefully remove 2 x phillips screws from right hand
side mounting bracket
Remove Left SYNC Display Bracket
Carefully remove 2 x phillips screws from left hand side
mounting bracket.
Set SYNC display aside as it will be re-installed later.
CarShow
Installation Guide
!!**
display.
CAUTION
CAUTION
Copyright 2013 All Rights Reserved
CS-MUST-IG Rev A
Page 5
Advertisement
