Programmed Play; Checking A Programme; Erasing A Programme - Roberts CD9913 User Manual

Programmed play

By programming the player you can play up to 21 tracks in any desired
order.
1. Whilst the CD is in STOP mode, press the Mode button. The
Programme indicator will start to flash and the display will show '01'.
2. Select the first track using the F.skip or B.skip buttons. The track
number flashes on the display and the Programme indicator lights
up. Store this track by pressing the Mode button.
3. The Programme indicator will flash and the display will show '02'.
4. Repeat the above steps until you have completed your program.
Press the Play/Pause button to commence play of the selected
tracks.
B.Skip Play/Pause Play/Pause
Stop
Mode Mode Mode
F.Skip F.Skip

Checking a programme

1
1
2
2
2 3
On On On On On 1. Whilst the CD is in STOP mode, press the Mode button. The Prog Prog Prog Prog Prog
2
Programme indicator will flash
2
4
Track Tra ck Tra ck Tra ck
2. Press the Play/Pause button to start playback of the programme. Repeat Repeat Repeat Repeat Repeat
Tra ck
3. Repeatedly press and release the F.skip button to step through the
programme. The display will show the programmed track numbers
and playback of the respective track will start.

Erasing a programme

1. Whilst the CD is in STOP mode, press the Mode button. The
Programme indicator will flash.
2. Press the Stop button to cancel the programme. Programmes are
also erased by:- Opening the CD door, moving the Function switch
to the 'Tape/Off' or 'Radio' positions and if the power supply is
interrupted in any way.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Mode
1
12