Playing A Cd; Selecting A Track; Search Function - Roberts CD9913 User Manual

Playing a CD

1. Press the Play/Pause button to start playback. The Play/Pause
button will light up and the display shows the track number.
2. Set the Volume and Deep bass boost controls to the required
settings.
3. To pause playback press the Play/Pause button. The Play/Pause
button will flash. To resume playback press the Play/Pause button
again.
4. To stop playback, press the Stop button. The total number of CD
tracks will then appear on the display.
5. To take out the CD, open the CD door by pushing the edge marked
Open. The CD door should only be opened when the CD is in Stop
Play/Pause Play/Pause mode.
Play /Pause
Stop
F.Skip F.Skip

Selecting a track

1 1
1. Whilst the CD is playing, press either the F.skip or B.skip buttons
4
2
to change to the desired track. You can also skip tracks when the
player is in stop mode. Skip to the desired track using the F.skip or
Track Track
B.skip buttons.
2. Press the Play/Pause button to play the selected track.

Search function

1. Whilst the CD is playing, press and hold down either the F.skip or
B.skip buttons. Release the button when the desired part of the track
is reached.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Play/Pause
1
Play/Pause
3
B.Skip
1
B.Skip
1
Track
Play /Pause
3
10