Programmed play
By programming the player you can play up to 20 tracks in any desired
order.
1. Whilst the CD is in Stop mode, press the Program button . The
display will flash '01' once before flashing '00'. The Program
indicator will flash.
2. Select the first track using the F.skip or B.skip buttons . The track
number will flash on the display. Store this track by pressing the
Program button . The display will flash the next counter number
('02') once before flashing '00'.
3. Repeat the above steps until you have completed your program
(maximum 20 tracks). Press the Play/Pause button to commence
play of the selected tracks.
4. To stop the program press the Stop button . The display will show
the total number of tracks. To resume program play press the
Program button , the display will flash the program counter
number ('03') once before flashing the programmed track number.
14
POWER
REPEAT
1
PROGRAM
2
2
/
/
POWER
REPEAT
PLAY/PAUSE
4
POWER
STOP
REPEAT
4
PROGRAM
PROGRAM
PLAY/PAUSE
2
PROGRAM
PROGRAM
3
PLAY/PAUSE
PROGRAM
PLAY/PAUSE