Group List; Dsc Options - Raymarine Ray260 User Manual

7.13 Group list

Groups can be created to the MY GROUP ID list to enable
group calling.
Existing groups can be edited and deleted as required.
Adding a Group MMSI
To make a group routine call you need to add a group MMSI
number to your group list. You can store up to 20 group MMSI
numbers on your radio.
From the DSC Menu:
1. Select MY GROUP ID.
2. Select an empty entry e.g. [EMPTY 01].
3. Use the Channel Up and Channel Down buttons to select
the number you want then select OK to confirm and move
to the next digit.
When all 9 digits of the MMSI have been entered you can
assign a name for the group.
4. Use the Channel Up and Channel Down buttons to select
the characters you want then select OK to confirm and move
to the next character.
The maximum length of group names is 10 characters.
5. When you have entered a name for the group select OK to
save the entry in your group list.
You will be returned to the group list.
6. You can use the Left Arrow and Right Arrow soft buttons at
any time to move forward or backwards to correct any errors.
Editing a group
You can edit the MMSI number and name of groups stored on
your radio.
From the DSC Menu:
1. Select MY GROUP ID.
2. Select the Group you want to edit.
The group's details are displayed.
3. Select EDIT.
4. Use the Left Arrow and Right Arrow soft buttons to highlight
the character you want to change.
5. Use the Channel Up and Channel Down buttons to select
the characters you want then select OK to confirm and move
to the next character.
6. When you have completed your changes select OK to save
the changes.
You are returned to your group list.
Deleting a group
You can delete group MMSI details.
From the DSC menu:
1. Select MY GROUP ID.
2. Select the group you want to delete.
3. Select DELETE.
4. Select DELETE again to confirm and delete the group.
The group list is displayed and the group is now deleted.
Digital selective calling (DSC)

7.14 DSC options

DSC options can be set from the DSC options menu.
When automatic channel
AUTO CH
CHANGE change is turned on the
radio will automatically
re-tune after 10 seconds to
the requested channel when
DSC calls are received.
The automatic channel
changing blocked icon
is displayed when the
setting is switched off.
INDIVIDUAL When individual reply is
set to auto the radio will
REPLY
automatically acknowledge
individual calls and distress
relay calls when received.
AUTO END When set to a time
interval the radio will
automatically end calls sent
or received which have
gone unacknowledged for
the specified time interval.
The timer can be set at 10
second increments from 10
seconds up to 15 minutes.
The default time interval is
30 seconds.
Note: This does not
apply to distress calls.
With position reply set
POSITION
REPLY to auto the radio will
automatically send out
position details when a
position request is received.
Accessing the DSC options menu
To access the DSC options menu follow the steps below:
1. Press and hold the DSC Menu button.
The DSC menu is displayed.
2. Select DSC OPTIONS.
The DSC options menu is displayed.
• ON
• OFF (default)
• MANUAL (default)
• AUTO
• 30 SECONDS
• SET TIMER
• DISABLE
• MANUAL (default)
• AUTO
51