Nmea 0183 Connection; Loud Hailer Connection - Raymarine Ray260 User Manual

4.4 NMEA 0183 connection

The NMEA 0183 wires on the power/data cable can be used to
connect the radio to a GPS receiver or a Raymarine multifunction
display.
Note: Connections cannot be made using SeaTalk
NMEA 0183 at the same time.
1
1. Ray260 base station.
2. Power/data cable.
3. Yellow – Receive positive (+) wire.
4. Green – Receive negative (-) wire.
5. White – Transmit positive (+) wire.
6. Brown – Transmit negative (-) wire.
The NMEA wires on the product's power / data cable should
be connected to a compatible NMEA 0183 devices as shown
in the table below:
Ray260
Yellow – Receive positive (+)
Green – Receive negative (-)
White – Transmit positive (+)
Brown – Transmit negative (-)
Connecting NMEA 0183 wires
NMEA 0183 wires should be connected securely and covered to
prevent corrosion.
22
ng and
2
D12613-1
NMEA 0183 device
to
Transmit positive (+)
to Transmit negative (-)
to Receive positive (+)
to
Receive negative (-)

4.5 Loud hailer connection

A single 30 watt loud hailer can be connected to the base station
via the loud hailer wires on the power / data cable.
1 (+) Hailer wire (Purple)
2
(-) Hailer wire (Gray)
Connecting loud hailer wires
Loud hailer wires should be connected securely and covered to
prevent corrosion.
1
D12813-1
Ray260