Entering Your Atis Id - Raymarine Ray260 User Manual

6.7 Entering your ATIS ID

To program your radio with your ATIS ID follow the steps below.
HI
---MAIN MENU----
gGPS SETUP
ATIS OPERATION
CONNECTION
HI
-ATIS OPERATION-
MY ATIS ID
ATIS FUNCTION
BACK
BACK
HI
-MY ATIS ID-----
ENTER MY ATIS ID
ID : - --------
BACK
HI
-MY ATIS ID-----
ENTER MY ATIS I D
ID:12 3456 789
PRESS OK
BACK OK
1. Press and release the MENU / DSC button to display the
main menu.
2. Select ATIS OPERATION from the main menu options.
• If NO ATIS ID CONTACT DEALER is displayed on-screen
then you must contact your local Raymarine dealer and
request them to input the ATIS ID for you.
• If ENTER MY ATIS ID is displayed then you can manually
enter your ATIS ID. All ATIS IDs begin with a 9, this is set
automatically and not shown on the display.
3. Use the Channel Up and Down buttons to cycle through
available numbers.
4. Select Ok to move to the next character.
5. Repeat steps 3 and 4 above until the full ATIS ID is displayed
on-screen.
6. You can also use the Right arrow and Left arrow soft
buttons to change which character is highlighted.
7. When finished select Ok to confirm the ATIS ID.
You will be requested confirm the ATIS ID by repeating the
entry.
8. With ENTER AGAIN displayed on-screen follow steps 3 to 6
above to enter the ATIS ID again.
9. Select Ok to confirm.
10. If NOT CONFIRMED is displayed then select Back and repeat
steps 2 to 9 above.
11. If CONFIRMED is displayed then select Yes to confirm and
register the ATIS ID.
The saved ATIS ID is displayed on-screen (e.g. ID:
123456789).
12. Select Back to go back to the ATIS Operation menu.
Note: You can only enter the ATIS ID number once, if you
have stored an incorrect ATIS ID number in your product, the
product will have to be reset by an authorized Raymarine
dealer.
36
HI
- M Y ATI S I D- - - - -
ENTER AGAI N
I D :- - - - - - - - -
BACK
HI
- M Y ATI S I D- - - - -
ENTER AGAI N
I D :123456789
PRESS OK
BACK OK
HI
- M Y ATI S I D- - - - -
CONFI RM ED
I D :123456789
REGI STER
NO YES
HI
- M Y ATI S I D- - - - -
I D :123456789
BACK
D12622-2
Enabling / Disabling the ATIS function
With the ATIS ID programmed you can now enable or disable
the ATIS function as required by following the steps below.
Note: If your radio has been configured to use Marcom-C
mode then ATIS will be permanently enabled and you will not
be able to disable ATIS operation. Marcom-C mode is set by
the dealer at point of sale. If you wish to enable or disable
Marcom-C, please contact your Raymarine dealer.
- ATI S FUNCTI ON- -
ON
OFF
HI
- ATI S OPERATI ON- BACK
M Y ATI S I D
ATI S FUNCTI ON
BACK
- ATI S FUNCTI ON- -
OK
ON
OFF
BACK
From the ATIS operation menu:
1. Select ATIS Function.
2. Select ON to enable the ATIS function, or
The message ATIS ON THEN DSC OFF is displayed
on-screen to warn that when ATIS is enabled then DSC
functions are not available.
3. Select OFF to disable the ATIS function.
The message ATIS OFF THEN DSC ON is displayed
on-screen to warn that when ATIS is disabled then DSC
functions are available again.
If no ATIS ID has been programmed then the message PLEASE
INPUT ATIS ID FIRST is displayed.
Note: With the ATIS function enabled the following functions
will be disabled:
• DSC functions.
• Scan functions.
• Multiple watch functions.
HI HI
- ATI S FUNCTI ON- -
ATI S ON
THEN DSC OFF
PRESS OK
OK OK
HI HI
- ATI S FUNCTI ON- -
ATI S OFF
THEN DSC ON
PRESS OK
OK
OK
BACK
BACK
D12623-1
Ray260