Selecting Nmea 0183 Or Seatalk Ng Connection; Regional Programming - Raymarine Ray260 User Manual

6.8 Selecting NMEA 0183 or SeaTalk
connection
The type of connection in use must be selected (i.e. SeaTalk
or NMEA 0183).
1. Press and release the DSC Menu button.
The main menu is displayed.
2. Select Connection.
3. Select Interface.
4. Select the required connection:
i. Select NMEA 2000 if you are connected to a network or
device using the SeaTalk
ii. Select NMEA 0183 if you are connected to a device using
the NMEA 0183 connection.
5. For NMEA 0183 connection on a radio that has a built in AIS
receiver, select the required baud rate, either STD Speed
or High Speed.
Getting started
ng connector, or
ng

6.9 Regional programming

The frequency band of the product can be changed and must be
set to the region the product will be used in.
ng
The regions available are:
• USA
• International
• Canada
Changing the frequency band
Before using the product to make DSC or other calls you must
set the frequency band to the relevant region.
HI
- - - M AI N M ENU- - - -
VHF OPERATIONv
HAIL/INTRCOM/FOG
GPS SETUP
From the Main menu:
1. Select VHF OPERATION.
2. Select FREQUENCY BAND.
The list of available regions is displayed:
• USA
• International
• Canada
3. Select the relevant region.
The selected region icon will be displayed on the top left of
the LCD screen.
• USA = USA
• INT = International
• CAN = Canada
HI HI
- VHF OPERATI ON- - - FREQUENCY BAND-
WATCH MODE v USA
FREQUENCY BAND INTERNATIONAL
CHANNEL NA M E CANADA
OK OK
D12815-1
37