Wiring And Safety Of Built In Oven - Prima LPR9000 Operating And Installation

3.3. WIRING AND SAFETY OF BUILT IN OVEN

The instructions given below must be followed without fail during wiring :
The earthing cable must be connected via the screw with the earthing mark. The supply
cable connection must be as shown in Figure 2. If there is no earthed outlet conforming to
regulations in the installation environment, call the Authorized Service Agent immediately.
The earthed outlet must be in close vicinity of the appliance. Never use an extension cord.
The supply cable should not contact the product's hot surface.
In case of any damage to the supply cable, make sure to call the Authorized Service Agent.
The cable must be replaced by the Authorized Service Agent.
The wiring of the appliance must be performed by the Authorized Service Agent. H05VV-F
type supply cable must be used.
Faulty wiring may damage the appliance. Such damage will not be covered under the
warranty.
The appliance is designed to connect to 220-240V~ if the electrical supply is different to the
value given above, call the Authorized Service Agent immediately.
The Manufacturer declares that its bears no responsibility whatsover for any
kind of damage and loss arising from not complying with the safety advice given
FIGURE 2
9