Installation - Miele ESW 700-25 User Manual

Built-in warming drawer
Hide thumbs Also See for ESW 700-25:
Table of Contents

Advertisement

Installation

Installation tips
– The warming drawer should be
placed at a convenient height for
easy access.
– The drawer should be installed clear
of drafts caused by open doors and
windows.
– Proper clearance must be allowed
for the warming drawer to open with
out interference.
– The warming drawer must be
secured to cabinetry to prevent the
drawer from tipping when loaded.
– The warming drawer should be level
to prevent the drawer sliding open or
closed on its own.
The drawer can not be leveled after it
has been installed.
If necessary install a shelf within the
cabinetry to support the drawer.
24
Steam from the vents can damage
the cabinetry to the warming drawer.
A minimum 2" (5 cm) gap must be
allowed between the upper edge of
the warming drawer and the
cabinetry.
This gap can be left open or filled
with a moisture restistance sealing
strip.
a Cabinetry front
b Separators (gap above and shelf
below)
c Warming drawer casing

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esw 760-25Esw 761-25

Table of Contents