Tutorial: Song Mode
Part 6: Adjusting The Volume Of Each Instrument
Adjust the volume of an instrument by adjusting the volume of the track containing that
instrument program. While your song is playing, you can use the Vol parameter on the Song
mode MAIN page to adjust the volume for the track currently set in the RecTrk parameter. To
permanently store your volume settings with the song, you must store an initial volume for each
track. Let's use the song we created in the parts above as an example. Let's adjust the volume of
track 1 and store the value as an initial volume setting:
1. On the Song mode MAIN page, use the Chan/Zone buttons (to the left of the display) to Set
2.
3.
15-10
the RecTrk parameter to track 1.
Find the desired volume level by adjusting the Vol parameter during playback, then press
stop. For this example, let's set the Vol parameter to 80.
Use the left and right more soft buttons at the bottom corners of the display to find the
MIXER soft button and press it (see below.) This brings you to the Song:MIXER page.