Applying Power; Setting The Volume - Kurzweil M-1 User Manual

2. Applying Power

1) Connecting the power cord
First insert the plug of the AC power cord into the AC connector on the Adaptor, then plug
the other end of the cord into the proper AC outlet on the wall. In some areas a plug ada-
ptor may be provided to match the pin configuration of the AC wall outlets in your area.
2) Plug the thin DC power cord into the DC Power Jack on the back of the piano.
3) Turn the power on
Press the power switch located on the right of the front panel to turn the power on. The
display located in the center of the front panel should light with various patterns and after a
short time display "GRAND PIANO".
CAUTION
Even when the instrument is turned off, AC power is still flowing to the adapter at a minimum
level. When you are not using the instrument for a long time or during electrical storms,
unplug the AC power cord from the wall outlet.

3. Setting the Volume

To adjust the volume, use the [Volume] knob located at the right of
front panel. Play the keyboard while you adjust the knob to a comfortable
and realistic volume.
NOTE
Adjusting the [Volume] knob also affects the output level of the Phones
jacks and the output level of the Audio Out jacks.
Power
Power
1 1