Tempo; Clock Source; Aux Fx Channel - Kurzweil PC3A User Manual

The COMMON Page
The COMMON page contains parameters that affect every zone in the current setup.
Parameter

Tempo

Clock Source

Aux FX Channel

KB3 Channel
Mutes
Arpeggiator Global
Tempo
When Clock Source is set to Internal, the Tempo parameter sets the PC3A system's tempo. The
Tempo parameter values are in units of BPM (beats per minute). You can also set the tempo using
the tap tempo function. Press the left and right cursor buttons simultaneously to access the
TEMPO page (see TEMPO
Clock Source
With the Clock Source parameter, you can set the PC3A—within the current setup—to generate
its own tempo by setting Clock Source to Internal, or you can set the PC3A to sync up with the
tempo from another device—assuming the device is sending MIDI clock data to the PC3A via
MIDI or USB—by setting Clock Source to External. When Clock Source is set to External, the
Tempo parameter disappears from the display.
Aux FX Channel
The Aux FX Channel determines the FX channel through which the aux sends of all of the zones
in the current setup are sent. For example, if a zone 2 in a setup has a program with 25 Basic
Delay 1/8 as an Aux FX, and zone 2 is assigned to channel 5, then setting the Aux FX Channel to 5
sends the programs of all of the zones in the setup through zone 2's Program's Aux FX (i.e.,
through 25 Basic Delay 1/8).
The Programmable Switch Pages: SWPRG1 to SWPRG8
Range of Values
20 to 300
Internal, External
1 to 16
1 to 16
Zone Mutes, KB3 Control
Off, Arp 1 to 16
on page 11-11.)
Setup Mode
Default
120
Internal
1
1
Zone Mutes
Off
7-65