Electrical Connection - Miele ESW 6114 Installation Manual

Electrical connection

,
CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
"tripping" the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
When another appliance is installed
in combination with the warming
drawer to the same circuit,
operating both appliances at the
same time may cause an overload.
If in doubt consult a qualified
electrician.
26
Power supply
This appliance is equipped with a
3
78 / " (2000 mm) long power cord with
4
a three-prong grounding plug ready for
connection to a 120 V, 15 A, 60 Hz
power supply.
Further installation details are on the
wiring diagram.
NEMA 5-15P, 15 amp, 120 VAC,
L1, N, G