Airflow Direction Control - Prem-I-Air PMINV18 User Manual

Airflow direction control

Suitably adjust the airflow direction otherwise it
may cause uneven room temperature.
Adjustable the horizontal louvre using the remote
controller.
Adjustable the vertical louvre manually.
To set the vertical airflow (up – down) direction
When the air conditioner running. Pressing the AIR
DIRECTION button in remote control to adjust the
louvre to desired angle. There is 6
switch press.
To set the horizontal airflow direction (left – right)
Adjust the vertical louvre manually using the lever on
left or right side (depending on model) of the vertical
louvre arm
Auto swing the airflow direction (up – down) –
using this feature when the air conditioner is on
Hold the AIR DIRECTION button at least 2
seconds or press the SWING button on remote
control. The horizontal louvre will swing up and
down automatically.
Press SWING button again to stop.
CAUTION
The SWING and AIR DIRECTION button will
be disabled when the air conditioner is not
operating. As will the TIMER ON function..
Do not operate the air conditioner for long
periods with the airflow direction set downward
in cooling or
condensation may occur in the surface of the
horizontal lovre.
Do not move the horizontal louvre manually.
Always use the SWING or AIR DIRECTION
button. If you move this louvre manually, it may
cause the unit malfunction or damage the
motor.
If the louvre should malfunction, stop and
re-start the air conditioner .
When the air
immediately after stopping the horizontal louvre
may not move for approximately 10 seconds
under system self regulation.
Open angle of horizontal louvre should be as
wide as possible as COOLING or HEATING
performance may be impaired due to too
restricted an airflow area.
DO NOT operate the unit with closed horizontal
louvre.
When the air conditioner is connected to power
(initial power connection), the horizontal louvre
may generate a sound for approximately 10
seconds, this is normal.
Page 9
O
move in every
dry mode. Otherwise,
conditioner is restarted