Table of Contents
Advertisement
1. TEMP
button: Use to set the room temperature down to 17
2. TEMP
button: Use to set the room temperature up to 30
3. MODE button: Press to select operation mode.
4. SWING button: Press to change the louvre angle.
5. RESET button: Press the recessed RESET button to reset all settings in remote control.
6. AIR DIRECTION button: Press to turn the directional swing of horizontal louvre.
Press and hold for two +2 seconds to turn the Auto swing feature on.
Press it again to stop louvre swing operation.
NOTE: If the louvre position affects the cooling or heating function, the system will adjust the
swing angle automatically.
7. LED DISPLAY button: Press to turn the display on or off.
8. FAN SPEED button: Press to select AUTO, LOW, MED or HIGH fan speed setting.
9. ON/OFF button: Press to turn the air conditioner on or off.
10. TIMER ON button: When the appliance is off, this button is used to switch the air conditioner on
automatically. Press to set the desired time up to 24 hours. Simply set 0:00 to turn the timer off.
11. SLEEP button: Press to go into Energy-Saving mode. This function is only available in COOL,
HEAT and AUTO mode. The pre-set condition is maintaining the most comfortable room
temperature.
Note: Press any button to return to normal operation.
12. TIMER OFF button: When the appliance is on, this button is used to switch the air conditioner off
automatically. Press to set the desired time up to 24 hours. Simply set 0:00 to turn the timer off.
13. LOCK button: Press the recessed LOCK button, all current settings are locked. All remote
control buttons are disabled. To cancel the LOCK mode, press the LOCK button again.
14. TURBO button: Press to set turbo fan setting.
Operation modes
AUTO mode
1. Press the MODE button to select AUTO mode.
2. Press TEMP button to set the desired room temperature. .
NOTE
*
In AUTO mode, the air conditioner will automatically choose the mode from COOL, FAN and
HEAT by sensing the difference between the actual ambient room temperature and the set
temperature.
*
If you are uncomfortable in AUTO mode, change to other mode settings.
COOL/HEAT/FAN modes
1.
Press the MODE button to select the desired operation mode.
2.
Press TEMP button to set the desired room temperature under COOL/HEAT mode.
3.
Press FAN SPEED button to select the desired speed setting.
DRY mode
1.
Press the MODE button to select DRY mode.
2.
Press TEMP button to set the desired room temperature
NOTE
*
The air conditioner is operating on and off automatically in dry mode.
O
C
O
C
Page 8
Advertisement
Table of Contents
